New R50, need some help
Moderator: Modern Buddy Staff
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
New R50, need some help
Hi there everyone, good to meet you all!
Proud owner of two R50's unrestricted. One Matte black, one red.
My red headed step child ran like a BULLET out of the gates but after about 3 weeks I started to have some issues. Man I loved it
Performance loss ( girl friends matte black pulled on me slightly now )
High pitch "whizzing" sound while accelerating and engine braking. Sound is coming from the engine. Also on a cold start the bike will not accelerate from a stop for about a second, just hesitates then takes off. Sound still remains when bike is warmed up but and rides better but not great.
Dealer diagnosed the clutch was bad, problem remains and they do not not what the problem is.
Fuel drips from the filter box once the bike is off no matter if I'm at a full tank/half tank etc.
I'll take a video of the issue and submit tomorrow.
Its been back and forth with the dealership here in vegas, so I might be stuck fixing it myself.
Got this bike back last time and they didn't tighten the CVT cover bolts to spec so now I'm missing some, also pinched the carb drain line behind the CVT cover... yeah...
Anyway any advice would be appreciated. I know you all wont be truly able to diag without a sound profile, so I'll have that up tomorrow.
Matte Black R50 still runnin like a bullet!
Proud owner of two R50's unrestricted. One Matte black, one red.
My red headed step child ran like a BULLET out of the gates but after about 3 weeks I started to have some issues. Man I loved it
Performance loss ( girl friends matte black pulled on me slightly now )
High pitch "whizzing" sound while accelerating and engine braking. Sound is coming from the engine. Also on a cold start the bike will not accelerate from a stop for about a second, just hesitates then takes off. Sound still remains when bike is warmed up but and rides better but not great.
Dealer diagnosed the clutch was bad, problem remains and they do not not what the problem is.
Fuel drips from the filter box once the bike is off no matter if I'm at a full tank/half tank etc.
I'll take a video of the issue and submit tomorrow.
Its been back and forth with the dealership here in vegas, so I might be stuck fixing it myself.
Got this bike back last time and they didn't tighten the CVT cover bolts to spec so now I'm missing some, also pinched the carb drain line behind the CVT cover... yeah...
Anyway any advice would be appreciated. I know you all wont be truly able to diag without a sound profile, so I'll have that up tomorrow.
Matte Black R50 still runnin like a bullet!
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
-
- Member
- Posts: 275
- Joined: Mon Oct 06, 2014 8:40 pm
Well, I haven't heard a sound like that before. Did they replace the entire clutch assembly or just the clutch itself?
Unbolt the CVT cover and see what's going on. Don't forget the bolt behind the kickstarter. You can run the engine with the cover removed, this might give you a better idea of where it's coming from.
Unbolt the CVT cover and see what's going on. Don't forget the bolt behind the kickstarter. You can run the engine with the cover removed, this might give you a better idea of where it's coming from.
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
aves-
Yeah dude, no one has according to the dealership. This is a "new thing"
According to the dealership they replaced part number P112351000 Outer Body Clutch.
I'll take the cover off this weekend and possibly get more sound clips, Might also bust out the stethoscope so I can isolate the sound.
Yeah dude, no one has according to the dealership. This is a "new thing"
According to the dealership they replaced part number P112351000 Outer Body Clutch.
I'll take the cover off this weekend and possibly get more sound clips, Might also bust out the stethoscope so I can isolate the sound.
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
- DeeDee
- Member
- Posts: 1110
- Joined: Sat Jul 26, 2014 5:07 pm
- Location: Denver
Your dealer told you the clutch bell was shot and needed replaced at 1,600 miles? You need to find a new dealer. No way on earth that thing needs replaced at 1,600 miles.
You need to take off the variator cover. Real easy, 6 - 8mm bolts. I suspect you will find your belt shredding, or something going on with your clutch carrier assembly.
Run it with the variator cover off, rev it up, and see what the belt is doing. There are plenty of youtube videos showing what what should be going on. As you rev your engine, the belt should be going out on the front variator and going in on the rear clutch.
Next step is to remove the clutch and take a look at the pads. I'd run the engine with the belt and clutch removed just to verify the noise is no longer there with the belt un-installed.
Did they replace the bell under warranty?
Is it acting the same way as before you had them work on it?
Your fuel issues sound like a problem with the carb float or petcock.
Is your scooter under warranty? Any other dealers in town?
You need to take off the variator cover. Real easy, 6 - 8mm bolts. I suspect you will find your belt shredding, or something going on with your clutch carrier assembly.
Run it with the variator cover off, rev it up, and see what the belt is doing. There are plenty of youtube videos showing what what should be going on. As you rev your engine, the belt should be going out on the front variator and going in on the rear clutch.
Next step is to remove the clutch and take a look at the pads. I'd run the engine with the belt and clutch removed just to verify the noise is no longer there with the belt un-installed.
Did they replace the bell under warranty?
Is it acting the same way as before you had them work on it?
Your fuel issues sound like a problem with the carb float or petcock.
Is your scooter under warranty? Any other dealers in town?
- DeeDee
- Member
- Posts: 1110
- Joined: Sat Jul 26, 2014 5:07 pm
- Location: Denver
Here is a short video I made on my C3 clutch removal. The holder can be made with a scrap of plywood and $3.00 worth of hardware from Ace:
https://www.facebook.com/abner.bjorn/vi ... 127105475/
https://www.facebook.com/abner.bjorn/vi ... 127105475/
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
Yep, these guys don't know what they are doing, and made the problem worse in the process and this has been going on for months now ( October ).
Yes, they did replace the bell under warranty but the same problem shown and described still remains and its getting worse with the acceleration hesitation and all.
Scooter is under warranty, and no...I kinda have to deal...with this so called "dealer"
Thanks for the explanation and the advice. I'll check out this video and do the diag on during the weekend when I have some time and post the results.
Yes, they did replace the bell under warranty but the same problem shown and described still remains and its getting worse with the acceleration hesitation and all.
Scooter is under warranty, and no...I kinda have to deal...with this so called "dealer"
Thanks for the explanation and the advice. I'll check out this video and do the diag on during the weekend when I have some time and post the results.
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
- DeeDee
- Member
- Posts: 1110
- Joined: Sat Jul 26, 2014 5:07 pm
- Location: Denver
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
-
- Member
- Posts: 275
- Joined: Mon Oct 06, 2014 8:40 pm
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
Update for today
So after having a long talk with the owner of the dealership, the guys seemed much for willing to help me out with my scooter.
They swapped out everything behind the cvt cover. Clutch assembly, belt, variator fan, variator, and even the start gear ( not sure what its called but its behind the variator ) from a BRAND new r50 ( same color even LOL) 2 miles on the odo.
STILL the FREAKIN noise remains!!! So, the mechanic deemed it an engine problem and now I'm waiting to for owner to get back to me...think I'll ask for a new bike.
So after having a long talk with the owner of the dealership, the guys seemed much for willing to help me out with my scooter.
They swapped out everything behind the cvt cover. Clutch assembly, belt, variator fan, variator, and even the start gear ( not sure what its called but its behind the variator ) from a BRAND new r50 ( same color even LOL) 2 miles on the odo.
STILL the FREAKIN noise remains!!! So, the mechanic deemed it an engine problem and now I'm waiting to for owner to get back to me...think I'll ask for a new bike.
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
-
- Member
- Posts: 240
- Joined: Thu Apr 03, 2014 11:56 pm
- Location: Oakland, CA
At least all this this isn't costing you a dime (At least it better not be, as everything described seems to be WARRANTY).alexvuk82 wrote:Update for today
So after having a long talk with the owner of the dealership, the guys seemed much for willing to help me out with my scooter.
They swapped out everything behind the cvt cover. Clutch assembly, belt, variator fan, variator, and even the start gear ( not sure what its called but its behind the variator ) from a BRAND new r50 ( same color even LOL) 2 miles on the odo.
STILL the FREAKIN noise remains!!! So, the mechanic deemed it an engine problem and now I'm waiting to for owner to get back to me...think I'll ask for a new bike.
- agrogod
- Member
- Posts: 1156
- Joined: Mon Jul 19, 2010 9:29 pm
- Location: Rancho Cordova, CA
I am going in a different direction since the "diagnosis/repair" didn't solve your problem. Have you checked the exhaust? Specifically the gasket between exhaust port and engine and the muffler gasket. Sounds more like an exhaust leak than a clutch problem.
"When your mouth is yapping your arms stop flapping, get to work" - a quote from my father R.I.P..
always start with the simple, it may end up costing you little to nothing
always start with the simple, it may end up costing you little to nothing
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
Yalzin- Very true and I plan on taking full advantage of the warranty, hence thats what we all paid for.
Agro- I will have them check that also! Didn't think about that one, so thanks.
Yeah, obviously not a drive train issue at this point, we've got that ruled out.
Agro- I will have them check that also! Didn't think about that one, so thanks.
Yeah, obviously not a drive train issue at this point, we've got that ruled out.
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
-
- Member
- Posts: 275
- Joined: Mon Oct 06, 2014 8:40 pm
-
- Member
- Posts: 660
- Joined: Sun Jan 15, 2012 2:55 am
- Location: kansas city mo
I was thinking clutch bearings or an issue with the clutch sheave itself. I don't think the noise is coming from the engine itself. It would be constant. It sounds like a bearing noise. The transmission gear cover could be pulled in about 15 minutes. A gasket is $6 or so. I would pull it and check the bearings. There are six inside the case.
161cc big bore kit, NCY big valve head Hand ported, NCY transmission kit, jetted and tuned. I can port your cylinder head.
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
- viney266
- Member
- Posts: 2270
- Joined: Thu May 19, 2011 8:49 pm
- Location: westminster md
- Contact:
Just like avescoots. I have worked on quite a few RH50's and have never heard that noise.
This will sound silly, but I would ride the bike up a hill and ride it down engine off and see if it still does it. You ( or the dealer) needs to isolate just where that noise is coming from. I do feel its in the engine, but can't be sure.
The good news? The RH50 is one tough scoot, and Genuine is a great company for taking care of their customers. They will get it worked out.
Does it only do it when throttle is off on decel or on the throttle,too?
Let us know what they find. I hope to never hear that noise, but would love to know what it is.
This will sound silly, but I would ride the bike up a hill and ride it down engine off and see if it still does it. You ( or the dealer) needs to isolate just where that noise is coming from. I do feel its in the engine, but can't be sure.
The good news? The RH50 is one tough scoot, and Genuine is a great company for taking care of their customers. They will get it worked out.
Does it only do it when throttle is off on decel or on the throttle,too?
Let us know what they find. I hope to never hear that noise, but would love to know what it is.
Speed is only a matter of money...How fast do you want to go?
- viney266
- Member
- Posts: 2270
- Joined: Thu May 19, 2011 8:49 pm
- Location: westminster md
- Contact:
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
With the owner of the dealership now involved hes pretty insistent to take care of everything now, which is good because I really don't have the time
But, I do check the this forum and continue to feed them information on what to do so I do appreciate all commentary.
The whizzing noise is present during acceleration and decel at the lower end of the rpm band.
I have isolated the sound and it IS coming from the cooling fan area, and made SURE they were aware of this at the dealership.
No one truly knows what this weird sound is, could be something stupid like a fan baring which is what I though it was to begin with like you said viney.
I will be calling them everyday, so I'll keep you all posted
But, I do check the this forum and continue to feed them information on what to do so I do appreciate all commentary.
The whizzing noise is present during acceleration and decel at the lower end of the rpm band.
I have isolated the sound and it IS coming from the cooling fan area, and made SURE they were aware of this at the dealership.
No one truly knows what this weird sound is, could be something stupid like a fan baring which is what I though it was to begin with like you said viney.
I will be calling them everyday, so I'll keep you all posted
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
Update for today;
So I got some bad news
Compression test was performed per tech at Genuine. Failed 30 PSI/140!!!
Uh, how was the bike even running?
Tech at the dealership also pulled the plug, from what he could tell I blew a seal/motor damage etc. Wish I had a pic.
So now waiting for the warranty company again...told the owner I wanted a new bike or my money back hah
So I got some bad news
Compression test was performed per tech at Genuine. Failed 30 PSI/140!!!
Uh, how was the bike even running?
Tech at the dealership also pulled the plug, from what he could tell I blew a seal/motor damage etc. Wish I had a pic.
So now waiting for the warranty company again...told the owner I wanted a new bike or my money back hah
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
-
- Member
- Posts: 12
- Joined: Thu Feb 11, 2016 3:22 pm
- Location: las vegas
- RoaringTodd
- Member
- Posts: 690
- Joined: Mon Jul 23, 2012 3:45 pm
- Location: Philly, PA
-
- Member
- Posts: 275
- Joined: Mon Oct 06, 2014 8:40 pm
-
- Member
- Posts: 1
- Joined: Wed Oct 03, 2012 4:53 am
- Location: Las Vegas
Scooter Nation pays for reviews ! If your Rs needs repairs Vegas Motor Sports , they where the dealers be for Scooter nation was... Chris is the one you need , He has built twostroke motors for Years not days like scooter Nation ! lol
That tech that told you your motor had 30 psi of compression has no clue ! Hey in the early 90's Chris built and raced Banshees here in Vegas and on the Mickey Thompson races , and won ! He bult all the motors so he does have some experience .. The only way they will fix it is if Genuine gives them a Motor!! Don't ask them to rebuild it , you think you have problems just wait ! Just talking from experience here go see VMS they even built goped motors for me infact his son was number 3 in the world in Goquad racing at the world finals ! Who do you think built it ?
I just hope you get it fixed ,with only 1600 miles that sucks
That tech that told you your motor had 30 psi of compression has no clue ! Hey in the early 90's Chris built and raced Banshees here in Vegas and on the Mickey Thompson races , and won ! He bult all the motors so he does have some experience .. The only way they will fix it is if Genuine gives them a Motor!! Don't ask them to rebuild it , you think you have problems just wait ! Just talking from experience here go see VMS they even built goped motors for me infact his son was number 3 in the world in Goquad racing at the world finals ! Who do you think built it ?
I just hope you get it fixed ,with only 1600 miles that sucks
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
Sorry folks, been hella busy workin.
Anyway, I should be getting my bike back from the dealer tomorrow.
Turned out the cylinder head was bad, tried to say I ran the bike out of oil. Which I obviously never did, so no worries there.
I'll get back to you guys after I get the bike back for the final verdict.
But yeah who would of known they needed to replace the top end right?
Hope it fixes the issue.
Anyway, I should be getting my bike back from the dealer tomorrow.
Turned out the cylinder head was bad, tried to say I ran the bike out of oil. Which I obviously never did, so no worries there.
I'll get back to you guys after I get the bike back for the final verdict.
But yeah who would of known they needed to replace the top end right?
Hope it fixes the issue.
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
- RoaringTodd
- Member
- Posts: 690
- Joined: Mon Jul 23, 2012 3:45 pm
- Location: Philly, PA
- FromHereToThere
- Member
- Posts: 83
- Joined: Sun Feb 14, 2016 4:56 am
- Location: Kitty Hawk
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
-
- Member
- Posts: 22
- Joined: Wed Feb 03, 2016 1:09 am
- Location: Las Vegas
Well, had another long talk with the owner of Scooter nation here in fabulous las vegas.
I pretty much gave the guy three options, give me a new bike, give me my money back or we go to court.
He agreed to give me a brand new rough house so I go in today and finalize the transaction, hopefully he lives up to his word.
I'll keep yall posted.
I pretty much gave the guy three options, give me a new bike, give me my money back or we go to court.
He agreed to give me a brand new rough house so I go in today and finalize the transaction, hopefully he lives up to his word.
I'll keep yall posted.
White R50
Matte R50 NCY Variator 6.5g rollers
Matte R50 NCY Variator 6.5g rollers
- FromHereToThere
- Member
- Posts: 83
- Joined: Sun Feb 14, 2016 4:56 am
- Location: Kitty Hawk
alexvuk82 wrote:Well, had another long talk with the owner of Scooter nation here in fabulous las vegas.
I pretty much gave the guy three options, give me a new bike, give me my money back or we go to court.
He agreed to give me a brand new rough house so I go in today and finalize the transaction, hopefully he lives up to his word.
I'll keep yall posted.
Can't go wrong there.
PGO makes great scooters. That is all.
- FromHereToThere
- Member
- Posts: 83
- Joined: Sun Feb 14, 2016 4:56 am
- Location: Kitty Hawk