Malossi Wild Lion Exhaust for Roughhouse does not fit
Moderator: Modern Buddy Staff
-
- Member
- Posts: 6
- Joined: Wed Oct 30, 2019 11:51 pm
- Location: 28025
Malossi Wild Lion Exhaust for Roughhouse does not fit
I purchased a 70cc BBK for my Roughhouse which includes a Malossi Wild Lion Exhaust. It is supposed to work with stock 50cc or mild 70cc BBK. I decided to install on my stock motor, re-jet and run it this way for awhile. The bracket is welded on and has all holes as stock but the mounting holes do not line up. The spacing is off. The holes in the exhaust bracket are too far forward and the bracket is hitting the plastic shroud on the motor. I am being told that this pipe fits both the Buddy and the Roughhouse. It may fit the Buddy but it does not fit the Roughhouse, not even close.
-
- Member
- Posts: 6
- Joined: Wed Oct 30, 2019 11:51 pm
- Location: 28025
Malossi exhaust mounting holes not lining up
The holes in the exhaust bracket are well forward of the mounting holes on the Roughhouse. This is with the header flange attached to the cylinder studs but not tightened down. the bracket on the exhaust is contacting the plastic fan shroud.
- Attachments
-
- pic2.jpg (48.51 KiB) Viewed 6934 times
- Stanza
- Member
- Posts: 575
- Joined: Mon Jan 29, 2018 8:34 pm
- Location: Chicago