Performance Crankshaft

The spirited black sheep of the Genuine lineup

Moderator: Modern Buddy Staff

Post Reply
czechojo
Member
Posts: 20
Joined: Sat Aug 04, 2018 10:26 am
Location: Durham, nc

Performance Crankshaft

Post by czechojo »

anyone have any suggestions on a better than stock crankshaft for a RH50?
preferably one that can easily be swapped out with the original
2016 Genuine Roughhouse Sport, malossi 70cc cylinder kit , Yasuni R.07 exhaust, dellorto 19 carb, carbon reeds, doppler air filter, Athena Cranshaft, Polini 14/41 Secondary gear, Malossi Multivar, Malossi Delta Clutch, Malossi Special X Belt, 5g rollers
Animo0808
Member
Posts: 1
Joined: Fri Nov 06, 2020 3:22 pm
Location: HI

Aftermarket Crankshaft

Post by Animo0808 »

Athena makes a good racing crankshaft for the roughhouse. https://www.scootertuning.ca/en/cranksh ... -10mm.html

Me personally I have modified my crank case just a little bit to fit a 2ab ministroker crank
User avatar
Stilltryn
Member
Posts: 7
Joined: Thu Oct 08, 2020 3:01 pm
Location: South Caorlina

Re: Performance Crankshaft

Post by Stilltryn »

Help! I lost it! What size and thread is that nut which holds all on the crank shaft?
Thought it was 10 mm
Machine screw with flanged nut to 15mm
User avatar
Stilltryn
Member
Posts: 7
Joined: Thu Oct 08, 2020 3:01 pm
Location: South Caorlina

Re: Performance Crankshaft

Post by Stilltryn »

I HV 2019 rh50 and I recently put on that 70cc Malossi kit
(Actually 72cc)
Now she climbs hills
Love it
DannyST
Member
Posts: 10
Joined: Wed May 12, 2021 6:41 am

Re: Aftermarket Crankshaft

Post by DannyST »

Animo0808 wrote: Fri Nov 06, 2020 3:32 pm Athena makes a good racing crankshaft for the roughhouse. https://www.scootertuning.ca/en/cranksh ... -10mm.html

Me personally I have modified my crank case just a little bit to fit a 2ab ministroker crank
Looks like they really got some good stuff there.
Post Reply