Top case for Roughhouse

Frohbego · Post by **Frohbego** » Mon Jul 08, 2013 1:15 am

What are some of my options for a top case for the roughhouse r50. I would like the top case to be a quick release.

Already installed Prima Rear Rack (http://www.scooterworks.com/prima-rear- ... doSpRbCngd)
Thanks!
- Jonathan

OldGuy · Post by **OldGuy** » Mon Jul 08, 2013 5:13 am

The Shad top cases are pretty easy to remove. Put the key in the correct position then push/release the case. It is a little clumsy but it works.

However, I have the larger rack on my roughhouse and I don't the Shad mount plate will attach without hanging way off the back end. I am judging this by the Shad which I mounted on my wife's Vespa LX50.

agrogod · Post by **agrogod** » Mon Jul 08, 2013 8:30 am

This is the exact case I got for my RH so I know it fits. Takes some doing but its doable. Only thing that is not showing are the zip ties used to keep the fit tight.

http://www.motorcycle-superstore.com/14 ... Trunk.aspx

OldGuy · Post by **OldGuy** » Mon Jul 08, 2013 2:46 pm

That works. I like it.

agrogod · Post by **agrogod** » Mon Jul 08, 2013 8:43 pm

Almost forgot, the red button you see in the middle shot is the release button, but you still have to put the key in to unlock it.
And thanks OldGuy, took me about 1 1/2 hrs. to get that damn plate in just the right spot. After all was batton'd down its still slightly crooked.

Frohbego · Post by **Frohbego** » Mon Jul 08, 2013 9:25 pm

any one else have photos of a top case using the RRRAT1-B rack.
thanks!