noob in need! RH50 air filter help +where to find a manual?

The spirited black sheep of the Genuine lineup

Moderator: Modern Buddy Staff

Post Reply
User avatar
jsunstar
Member
Posts: 14
Joined: Mon Jun 11, 2012 12:00 am
Location: Key West Florida

noob in need! RH50 air filter help +where to find a manual?

Post by jsunstar »

i found an online manual but it sucks...
is there a decent manual for the roughhouse 50?

i need to know if there is a hose supposed to be attached to the back side of the air filter.
i see that there is a hose under the bike by the carb and there is a small opening in the back of the air filter with a hose barb on it.
they dont match in size...
is there an adapter or something thats missing?
can someone snap a pic or direct me to a picture online? ive been looking for info on these for days and havent found much...
thanks
jason
User avatar
jsunstar
Member
Posts: 14
Joined: Mon Jun 11, 2012 12:00 am
Location: Key West Florida

Post by jsunstar »

http://www.novelforce.com/pmx50&110_partslist.pdf

looking in the above , in section #e10,part # 9, its called an air hose (says not supplied but mine is on there.)
im thinking something needs to go on there as air goes directly into the air cleaner and im thinking that the hose thats sitting there needs to go on there.
anyone????
User avatar
agrogod
Member
Posts: 1156
Joined: Mon Jul 19, 2010 9:29 pm
Location: Rancho Cordova, CA

Post by agrogod »

The online manual is no better than the hard copy, what you have is as good as it gets.

The hose in question is for engine cooling not the air filter. If you reference E2 #15 that's the hose you are seeing. Does not attach to any thing. You may want to angle it to face the engine so it does what it is intended to.

The E10 #9 should be referred to as an air snorkel since it is just an elbow that comes from the air filter housing to help direct outside air to the filter.

Translation of the manual to English lose's alot, in the translation.
"When your mouth is yapping your arms stop flapping, get to work" - a quote from my father R.I.P..
always start with the simple, it may end up costing you little to nothing
User avatar
jsunstar
Member
Posts: 14
Joined: Mon Jun 11, 2012 12:00 am
Location: Key West Florida

Post by jsunstar »

the hose it was aimed directly at the carb.... ill just leave it there i guess...
thanks for the info.

theres not much other information on these im finding out. that manual works for specs but doesnt go into much detail... if thats all we get, thats all we get...
User avatar
agrogod
Member
Posts: 1156
Joined: Mon Jul 19, 2010 9:29 pm
Location: Rancho Cordova, CA

Post by agrogod »

Yeah, after 2 years I'm still finding out new things. But that's half the fun of ownership.
"When your mouth is yapping your arms stop flapping, get to work" - a quote from my father R.I.P..
always start with the simple, it may end up costing you little to nothing
Post Reply