Page 1 of 1
Any trouble getting parts?
Posted: Sat Sep 11, 2021 12:51 pm
by docjones
I have wanted a 220i since they came out. Such a great looking scoot. I've had a Kymco, 3 Honda scooters, and now a MP3. I have found getting parts for the MP3 takes time. Like 6 weeks for a OEM fuel filter. Never any problems getting parts for the Kymco or the Hondas. Just wondering if parts are readaly available. I have my eye on one so need to find out if they, Genuine, have plenty of parts?
Re: Any trouble getting parts?
Posted: Wed Sep 15, 2021 9:47 am
by maxg022
Hi,
I bought a Blur 220i ~6 weeks ago. I have since then bought a V-Belt, Air Filter, Spark Plug and Oil Filter. The V-Belt I ordered via Ebay and it came from Taiwan in about 10 days, but it was rather expensive at ~$100. The Air filter I also ordered via Ebay and it came from the US and it was about $43, but it was new old stock (looks new, but the manufacturing date on the molded plastic frame says 2012!). The CR7E spark plug and HF-197 oil filter were cheap and easily available, $5 and $8.
You can check for parts at
http://www.scooterloungeonline.com/, I had been on the phone with them and they seem to have a good selection, although it sounds like some parts like the fuel pump are not in stock and also not easy to get. I'm glad that mine seems to work, but if someone knows if there is compatible alternatives on the market, that would help as well. Same applies for the V-Belt, where the original one seems expensive.
Re: Any trouble getting parts?
Posted: Sun Jun 19, 2022 11:19 pm
by johnwoodsrides
Refresh old thread…..
I need a fuel pump, apparently, the previous owner “fixed it” with epoxy, and it was fine for about 100 miles when a hit a huge bump and the fitting coming out of the tank started spewing fuel. All of the online catalogs say “out of stock”, any suggestions?
John
Re: Any trouble getting parts?
Posted: Tue Aug 23, 2022 7:33 pm
by adiggityd
I need a fuel pump too, and they are absolutely unobtanium everyplace. If ANYBODY has a fuel pump, I'll pay good money for it.
Re: Any trouble getting parts?
Posted: Sun Sep 25, 2022 2:38 pm
by peterp2
Kymco x-town 300 fuel pump will work.
Re: Any trouble getting parts?
Posted: Thu Oct 03, 2024 11:39 pm
by davelhunter
Peter, Can you post any more details about the Kymco pump? Is it a direct replacement, or modification needed? Thank you!
Re: Any trouble getting parts?
Posted: Mon Oct 07, 2024 2:12 pm
by DeeDee
Have you removed the assembly and taken out the pump? Does it look like this? I don't know the Blur, but a lot of fuel injected scooters have pump housing assemblies unique to that bike which hold a rather generic fuel pump. Buddy 170i, Most Yamahas and a lot of Vespas use the same 30mm pump. Suzuki Burgmans and many of their motorcycles use a 35mm pump. There are loads of these reliable well made pumps available for under $20.
Post a picture please if you have the pump assembly out of the bike.