Hello all - New Blur owner here!!
Posted: Mon May 05, 2014 1:24 pm
Howdy from Texas. Just got a new 2013 Blur SS 220i at a dealer in New Braunfels, even though I live in the DFW area. they have a great special on the 2013's at $3,199 plus TTL.
That put me out the door at a little over $3,500. I consider that a pretty good deal.
I don't see a whole lot of model specific stuff out there for these scoots but I have to say...after owning several Chinese scoots that I have chopped and modified and several sport bikes that I have also "personalized," I'm not at all worried that I don't see things out there with Blur listed. Other than a few body parts and maybe the ECU tuning stuff...just about any part will fit if are willing to do a little fab work.
I've seen a few exhausts out there for 800+. That's crazy talk! Any scooter exhaust with a 1 1/4" inlet diameter will slip right on. You just have to make your own bracket/clamp.
Everything else on the bike is pretty much standard GY6 stuff. I'll be looking for a shock soon...Even though I love the stiffness of the stock one, I know from experience that it's bound to be short lived before it regresses into a "spring on a pole." There are a ton of shocks out there that will fit...just take a few measurements like overall length and diameter of the spring; then a few things like total bike weight and bike/rider as well. Once you have that, the sky is the limit. You could buy Ohlins if you wanted to spend the $$.
I'd post a pic of mine but you've seen plenty of stock pics. I'll be starting a thread with my mods as they come about...which won't be toooo quick since I really bought this one as a daily commuter. I have other bikes that I tear apart and rebuild regularly...now I know I can play with those without fear of being without a bike.
That being said, I know that I can never leave well enough alone, so within the next month or so I'll be doing the following in no particular order:
1. Lower the bike between 1" and 2" inches.
2. Fender eliminator.
3. removing the stock indicators and relocating them to the integrated ones in the fairing.
4. Reshape the seat foam.
These might take a bit more time as I will have to research the availability of ECU re-mapping/modification tools.
5. New intake with UNI filter.
6. New Exhaust.
That put me out the door at a little over $3,500. I consider that a pretty good deal.
I don't see a whole lot of model specific stuff out there for these scoots but I have to say...after owning several Chinese scoots that I have chopped and modified and several sport bikes that I have also "personalized," I'm not at all worried that I don't see things out there with Blur listed. Other than a few body parts and maybe the ECU tuning stuff...just about any part will fit if are willing to do a little fab work.
I've seen a few exhausts out there for 800+. That's crazy talk! Any scooter exhaust with a 1 1/4" inlet diameter will slip right on. You just have to make your own bracket/clamp.
Everything else on the bike is pretty much standard GY6 stuff. I'll be looking for a shock soon...Even though I love the stiffness of the stock one, I know from experience that it's bound to be short lived before it regresses into a "spring on a pole." There are a ton of shocks out there that will fit...just take a few measurements like overall length and diameter of the spring; then a few things like total bike weight and bike/rider as well. Once you have that, the sky is the limit. You could buy Ohlins if you wanted to spend the $$.
I'd post a pic of mine but you've seen plenty of stock pics. I'll be starting a thread with my mods as they come about...which won't be toooo quick since I really bought this one as a daily commuter. I have other bikes that I tear apart and rebuild regularly...now I know I can play with those without fear of being without a bike.
That being said, I know that I can never leave well enough alone, so within the next month or so I'll be doing the following in no particular order:
1. Lower the bike between 1" and 2" inches.
2. Fender eliminator.
3. removing the stock indicators and relocating them to the integrated ones in the fairing.
4. Reshape the seat foam.
These might take a bit more time as I will have to research the availability of ECU re-mapping/modification tools.
5. New intake with UNI filter.
6. New Exhaust.