Page 1 of 1
Exhausts
Posted: Mon Dec 12, 2011 2:34 am
by waspmike
Who if anyone is interested in a SS exhaust for their Blur? 150 or 220.
I may have an inside track to get some made if there is sufficient interest.
Posted: Mon Dec 12, 2011 4:29 am
by turboscott
I would be interested if done right and proven.
Posted: Mon Dec 12, 2011 2:17 pm
by omniphil
If it actually increased horsepower, I would want one.
If it just makes more noise, not interested.
Posted: Mon Dec 12, 2011 3:59 pm
by Rippinyarn
<raises hand> but it can't be too expensive <turns out pockets>
exhausts
Posted: Fri Dec 16, 2011 10:56 pm
by ScootCorps
Do you have any pics or info on what you are talking about? I am VERY interested in an exhaust, if it is either titanium/carbon (yoshimura-style), sounds right & actually enhanced performance.
Posted: Sun Dec 18, 2011 8:34 am
by inspyre5
I am interested as well.
Posted: Thu Dec 22, 2011 5:29 am
by turboscott
You guys that are worried about power do realize this is a 16HP motor so you wont get much more amazing power out of it right?
I would love a better tone...not a noise maker,
More sporty look...not offensive garage kit,
Lighter set-up....to release power to wieght ratio!
Be one of the few who have a better exhaust...cuz chicks dig it!
VERY VERY INTERESTED
Posted: Mon Jan 02, 2012 9:29 pm
by SevenhertZ
I'm down for anything. This has me very excited.
Blur 220 Exhaust
Posted: Wed Jan 04, 2012 6:01 pm
by ScootCorps
The OE exhaust is soooo lame. Lightweight, progressive design, high-mount, aggressive note, rebuildable would be preferred.
Posted: Thu Jan 05, 2012 5:31 am
by dorby
Dorbyworks Exhaust
Posted: Thu Jan 05, 2012 9:57 pm
by ScootCorps
The sound from the CF exhaust is the best I've heard come from a GY6!
And the style is exactly what I'm talking about!
How much and what's the possibility of making an "under-tail" exhaust?
Posted: Fri Jan 06, 2012 6:47 am
by waspmike
Just an update I'm planning to visit the factory in the next two weeks. Will post as soon as I know more.
Posted: Fri Jan 06, 2012 2:05 pm
by 15uzu
While you're there.....ask them about doing a pipe for the X-Hot as well.......there is virtually nothing on the market at the moment.
Posted: Thu Jan 12, 2012 9:27 am
by waspmike
My apologies to all. But I went to the factory and no-can-do.
The one I saw and talked to the owner about was a one-off and they don't want to do anymore.
Posted: Fri Mar 02, 2012 2:10 pm
by Swordsman
Okay, that green Ruckus looks incredible, but
1.) Can it turn, and
2.) How the heck does it even spin those massive wheels?
~SM
Posted: Sun Mar 04, 2012 2:59 pm
by Rippinyarn
I spoke with the Scooterworks guys at Dealer Expo and they too are unsure about even a Prima pipe for the Blur. They apparently are shy because the number of the scoots isn't big, so the 'pool' of potential buyers is already small, and then you add in a significant cost item (the cheapest of the slip-on pipes for motorcycles are close to $400), so you can see why they feel the way they do.
Our best bet is probably to look for a stock motorcycle pipe replacement via an adaptor or something that would slip on after the inspection bung.
Posted: Mon Mar 05, 2012 8:19 am
by brianwheelies
What is the Blur engine based off of? I thought it was an enlarged GY6. If so, would a Buddy 125/150/170 exhaust work?
