Issue removing lock body and barrel

The original 2-stroke Genuine scooter and its 4-stroke manual and automatic offspring

Moderator: Modern Buddy Staff

Post Reply
Walks
Member
Posts: 2
Joined: Sat Jul 17, 2021 9:20 pm

Issue removing lock body and barrel

Post by Walks »

Hey all, new member and owner of a 2005 Stella 2T.

My buddy that I acquired the scooter from lost the keys so I picked up new keys and barrels from Scooterworks. I have the steering column cover off and the harness for the ignition but I'm have been trying to depress the tang on the barrel in for about two flipping hours with no luck. I have used a micro screwdriver, 90 degree pick, and even a coat hanger to no avail.

Any ideas?

Also having issues posting pix. I reduced one down to < 400k and still won't upload.
Walks
Member
Posts: 2
Joined: Sat Jul 17, 2021 9:20 pm

Re: Issue removing lock body and barrel

Post by Walks »

Issue resolved. Just needed patience with the 90 degree pick and a key in the barrel to wiggle the barrel out.
Post Reply