Can anyone with a Stella 4T get me a resistance value of the blue wire coming off the stator? Right now I get no continuity period.
Im trying to diagnose a bad regulator/ rectifier and think the problem might be at the stator instead.
Thanks everyone.
Stella 4T stator resistance values
Moderator: Modern Buddy Staff
-
- Member
- Posts: 37
- Joined: Fri Feb 03, 2012 2:27 am
- Location: Oceanside, CA
-
- Member
- Posts: 37
- Joined: Fri Feb 03, 2012 2:27 am
- Location: Oceanside, CA
Pulled the stator and had no continuity between the coils so I eventually found where one of the copper windings had snapped. Soldered it as best I could and then reinstalled everything and I had lights. To answer my initial question resistance was super low through the blue and black wires. Less than 1 ohm.