Needs Some Help!!!!
Moderator: Modern Buddy Staff
- Drum Pro
- Member
- Posts: 1163
- Joined: Thu Sep 01, 2011 4:03 am
- Location: Victorville, Ca.
Needs Some Help!!!!
K so I go to start my Stella and it's not starting. I just got it back from the shop a month ago and it was running like a champ. The fly wheel is spinning but it ain't starting. All the cables have just been replaced and seem to be in good order. Stumped again.....
- viney266
- Member
- Posts: 2270
- Joined: Thu May 19, 2011 8:49 pm
- Location: westminster md
- Contact:
-
- Member
- Posts: 332
- Joined: Sun Feb 14, 2016 7:01 pm
-
- Member
- Posts: 332
- Joined: Sun Feb 14, 2016 7:01 pm
- az_slynch
- Member
- Posts: 1809
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
Re: Needs Some Help!!!!
Let's go over the basics:Drum Pro wrote:K so I go to start my Stella and it's not starting. I just got it back from the shop a month ago and it was running like a champ. The fly wheel is spinning but it ain't starting. All the cables have just been replaced and seem to be in good order. Stumped again.....
1) Fuel on?
2) Fuel tried on Main and Reserve?
2) Choke out?
3) Kill button not stuck in?
4) Is the spark plug cap clipped firmly on top of the plug?
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
- BigDaddy SnakeOiler
- Member
- Posts: 322
- Joined: Mon Feb 02, 2015 12:08 pm
- Location: EPX
Try disconecting the kill switch. It's under the horncast.
<a href="https://www.facebook.com/bigdaddyOTR/">
Big Daddy Scooter Bum Blog</a>
<a href="https://www.facebook.com/bigdaddy.snakeoiler">
BigDaddy on FaceBook</a>
Big Daddy Scooter Bum Blog</a>
<a href="https://www.facebook.com/bigdaddy.snakeoiler">
BigDaddy on FaceBook</a>
- RoaringTodd
- Member
- Posts: 690
- Joined: Mon Jul 23, 2012 3:45 pm
- Location: Philly, PA
- jimmbomb
- Member
- Posts: 801
- Joined: Fri May 20, 2011 1:00 am
- Location: St Louis
Did you try kick starting? Does your bike live outside in the elements or in a covered garage, etc?
Loosen your gas cap for a bit.
Loosen your gas cap for a bit.
J H
[URL=https:///][/URL] upload pics
[URL=https:///][/URL] upload pics
- Stilts
- Member
- Posts: 281
- Joined: Thu Jun 23, 2011 7:33 pm
- Location: Baltimore, MD
- Contact:
I have over 13k miles on my "POS knock off."Drum Pro wrote:2 days. I live in a place with year round riding.... Starting to think the Stella is POS knock off....
Sounds like you have an electrical or fuel issue. I would especially check the kill switch sticking and the fuel tap. I have, more than once, had a non-starting bike because of those two things (because I'm an idiot).
- Drum Pro
- Member
- Posts: 1163
- Joined: Thu Sep 01, 2011 4:03 am
- Location: Victorville, Ca.
I'm just frustrated. As I just got the bike back a month ago and it's down again...Stilts wrote:I have over 13k miles on my "POS knock off."Drum Pro wrote:2 days. I live in a place with year round riding.... Starting to think the Stella is POS knock off....
Sounds like you have an electrical or fuel issue. I would especially check the kill switch sticking and the fuel tap. I have, more than once, had a non-starting bike because of those two things (because I'm an idiot).
- jimmbomb
- Member
- Posts: 801
- Joined: Fri May 20, 2011 1:00 am
- Location: St Louis
-
- Member
- Posts: 127
- Joined: Sat Dec 27, 2014 7:12 am
- Location: TX, USA
- Contact:
- BuddyRaton
- Scooter Dork
- Posts: 3887
- Joined: Sat Sep 09, 2006 10:08 pm
- Location: Boca Raton, Florida
- Contact:
Start with the basics.
Do you have fuel flow?
Do you have spark at the plug?
Do you have fuel flow?
Do you have spark at the plug?
"Things fall apart - it's scientific" - David Byrne
www.teamscootertrash.com
'06 Cream Buddy 125, 11 Blur 220, 13 BMW C 650 GT, 68 Vespa SS180, 64 Vespa GS MK II, 65 Lambretta TV 175, 67 Vespa GT, 64 Vespa 150 VBB 64 Vespa GL
www.teamscootertrash.com
'06 Cream Buddy 125, 11 Blur 220, 13 BMW C 650 GT, 68 Vespa SS180, 64 Vespa GS MK II, 65 Lambretta TV 175, 67 Vespa GT, 64 Vespa 150 VBB 64 Vespa GL
- jimmbomb
- Member
- Posts: 801
- Joined: Fri May 20, 2011 1:00 am
- Location: St Louis
Im wondering why you had all the cables replaced? Dammnnn.. they we all frayed? But not yet broken?
J H
[URL=https:///][/URL] upload pics
[URL=https:///][/URL] upload pics
- az_slynch
- Member
- Posts: 1809
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
I've seen a failed one. The exciter coil for the CDI shorted internally. I should have kept it to re-wind that coil.Drum Pro wrote:update: So it was the stator. 6800 mi. and a bad stator?
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
- Johnny O
- Member
- Posts: 71
- Joined: Fri May 16, 2014 7:37 am
- Location: NE Ohio
A stator is toast once the insulating resin breaks down and the stator shorts to ground. Manufacturing defect is the first failure mechanism that comes to mind. High temperatures also can cause premature failure of the insulation around the windings.
Mileage really only indicates age if you are assuming normal driving. If you ride long hard rides (sustained high RPM) you could get additional heat that causes faster break down. Who knows.
Mileage really only indicates age if you are assuming normal driving. If you ride long hard rides (sustained high RPM) you could get additional heat that causes faster break down. Who knows.
-
- Member
- Posts: 4
- Joined: Thu Sep 18, 2014 10:28 pm
- Location: United States
Mine wouldn't start either. It turns out the choke cable is about 1/4" too long and choke won't go shut enough to start it. Also it was delivered without a fuel cap gasket which proceeded to allow gas to leak all over the tank and my fuel gauge quit working already. Also the cheap plastic fuel cap is now cracked. Genuines warranty is worthless, I asked for a new fuel sender and they said take it to a dealer which we don't have in this city. This is after 130 miles. The bike is a 2012 4t. I think it is a POS and any other scooter would be higher quality. I bought this because I thought it would be similar to a Vespa in quality. What a mistake!
-
- Member
- Posts: 4
- Joined: Thu Sep 18, 2014 10:28 pm
- Location: United States
Mine wouldn't start either. It turns out the choke cable is about 1/4" too long and choke won't go shut enough to start it. Also it was delivered without a fuel cap gasket which proceeded to allow gas to leak all over the tank and my fuel gauge quit working already. This is after 130 miles. The bike is a 2012 4t. I think it is a POS and any other scooter would be higher quality.
- Dooglas
- Moderator
- Posts: 4368
- Joined: Sun Jul 08, 2007 2:17 am
- Location: Oregon City, OR
Where did you acquire that idea? Certainly not be reading this website. A Stella can be a lot of fun IMO, but I think they are best matched up with those who are capable of doing most of their own mechanical work.fpcopo wrote:I bought this because I thought it would be similar to a Vespa in quality. What a mistake!
-
- Member
- Posts: 4
- Joined: Thu Sep 18, 2014 10:28 pm
- Location: United States
I do all my own work. I just fixed the choke by machining a cycle spoke nipple to fit the end of the choke cable end and cut a slot in it for the cable. This spaced it out enough for the choke to shut completely. The selling dealer had sent me a new gas cap to replace the gasket less original so I replaced the cracked one with tha. Now I have to fix the fuel gauge. Someone posted a while back that the rheostat wiper in the sender gets dirty from something in the gasohol. I thought they said they cleaned it and bent the wiper to increase the tension on it. Am I on the right track? I just don't think you should have to do all this on what is basically a new bike
-
- Member
- Posts: 4
- Joined: Thu Sep 18, 2014 10:28 pm
- Location: United States
I do all my own work. I just fixed the choke by machining a cycle spoke nipple to fit the end of the choke cable end and cut a slot in it for the cable. This spaced it out enough for the choke to shut completely. The selling dealer had sent me a new gas cap to replace the gasket less original so I replaced the cracked one with tha. Now I have to fix the fuel gauge. Someone posted a while back that the rheostat wiper in the sender gets dirty from something in the gasohol. I thought they said they cleaned it and bent the wiper to increase the tension on it. Am I on the right track? I just don't think you should have to do all this on what is basically a new bike
-
- Member
- Posts: 127
- Joined: Sat Dec 27, 2014 7:12 am
- Location: TX, USA
- Contact:
The Stella is quirky no doubts, but many of your issues are dealer prep issues that should have been noticed by the place you bought it from and corrected there. Also, all vehicle warranties traditionally go through a dealer where they have to verify that there is a problem and that it is covered.
The fuel gauge however is a POS part and not very accurate. You are on the right track on fixing it, assuming the float needle didn't break.
The fuel gauge however is a POS part and not very accurate. You are on the right track on fixing it, assuming the float needle didn't break.
- Neurotic-Hapi-Snak
- Member
- Posts: 335
- Joined: Thu Jun 05, 2014 2:56 am
- jimmbomb
- Member
- Posts: 801
- Joined: Fri May 20, 2011 1:00 am
- Location: St Louis
Good answer!! Check there, yepsrbbnd wrote:My fuel gauge stopped working and I was because the wire was lose in the headset. Was an easy fix.
J H
[URL=https:///][/URL] upload pics
[URL=https:///][/URL] upload pics