Hey I need advice on honing I feel 220 short tip 3 teeth stone hones too light
Looking for a slightly deeper ra between 15-20 ra stock rings.
I looked at ball hone none = 40mm
Closest is a nylon steel brush about 13/32
I want to do it perfect
Jugs based off 84 nb50 specs with -.1 on the piston height
NB 50 84 40mm x 39.3
Yamaha/ minarelli piston spec 40mm x 49.2 which represents the negative one.
Cast cyl cast rings
What's the best grit rate for a 3 stone hone in compriaon to ball hone.
Quick in and out break the glaze. Stone hones catch the port timing sides which is why i prefer ball.
Cylinder hone help PGO Star 50 cylinder based off 84 HONDA
Moderator: Modern Buddy Staff
-
- Member
- Posts: 81
- Joined: Thu Jan 07, 2016 2:50 am
- Location: Seattle, WA