I didnt want to hijack Eric's thread on instructions to replace the stock turn signal "alarm" so I started this one
Has any one moved the Stella turn signal alarm?
I am thinking it would be better to have it mounted inside the glove box.
After putting one piece of tape on the stock "alarm" it is quiet enough from in front of the scooter that it no longer sounds like a truck backing up but....
from the riding position, it is too quite to be a good reminder that I left a turn signal on.
I am guessing one of the reasons it is located where it is, is so pedestrians know a scooter is making a turn near them.... otherwise it would be on the other side of the leg shield right?
So... has anyone moved their turn signal "alarm" inside their glove box?
Moving the Stella turn signal "alarm" in glove box
Moderator: Modern Buddy Staff
- ScootLemont
- Member
- Posts: 2526
- Joined: Fri Apr 11, 2008 6:20 pm
- Location: Lemont IL
- Contact:
- ScootLemont
- Member
- Posts: 2526
- Joined: Fri Apr 11, 2008 6:20 pm
- Location: Lemont IL
- Contact:
- jmkjr72
- Member
- Posts: 783
- Joined: Sat Jul 11, 2009 11:07 pm
- Location: green bay wi
- Contact:
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
Uh, yeah, I can only hear mine while stopped. Makes it about 50% effective, but 0% annoying.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…