STANDARD PILOT JET SIZE WA STATE SEA LEVEL UP TO 2250 ABOVE?
Posted: Thu Mar 24, 2016 5:36 pm
Finished replacing my old head gasket and threw in an extra base gasket between the fairly new one now I would like to know what is the typical standard piolet jet size for WA STATE USERS or sea level USERS.
THIS WILL GIVE ME A START POIINT AS I HAVE CLONE KEIHINS UNMARKED genuine jets by Keihins.
what sized threading do PB style carbs use?
Piolet jet is presumed too rich at idle, exhaust pop some times at shut off via kill switch it zing/pings sometimes with splooge at idle only heat conduction.
0% lag in throttle pulls up hills pretty good too.
I am runnining 92 octane at the time,
THIS WILL GIVE ME A START POIINT AS I HAVE CLONE KEIHINS UNMARKED genuine jets by Keihins.
what sized threading do PB style carbs use?
Piolet jet is presumed too rich at idle, exhaust pop some times at shut off via kill switch it zing/pings sometimes with splooge at idle only heat conduction.
0% lag in throttle pulls up hills pretty good too.
I am runnining 92 octane at the time,