Bang for the Buck Roughhouse Build
Posted: Thu Sep 01, 2022 1:02 am
I own a 2018 Black Roughouse
That I have added and tried a bunch of different parts on
Polini ,Malossi ,Stock and NCY Golden Variator
A variotor upgrade is a must do the stock variator leaves about 4mm of travel
Ncy Street Pipe ,Malossi Wild Lion ,Yasuni R
The NCY pipe is only slightly better than stock the Malossi pipe runs 500 rpms more and that Yasuni R runs 1000 rpms higher with power over stock
I have run all 3 pipes on stock bore and with Malossi MHR Replica
A kit adds alot of power but needs a carb upgrade and a temp gauge to protect the investment.
Stock Carb upjetted main and a bolt on 17.5 Dellorto carb
the stock throttle cable and autochoke can be used .
I have also swapped in malossi gears
I did have to lighten the weights so I could get the same shift points with the 11 to 1 gear ratio
From my experience over the last year tuning and my prior years experience tuning Yamaha Zumas and Vinos.
That I have added and tried a bunch of different parts on
Polini ,Malossi ,Stock and NCY Golden Variator
A variotor upgrade is a must do the stock variator leaves about 4mm of travel
Ncy Street Pipe ,Malossi Wild Lion ,Yasuni R
The NCY pipe is only slightly better than stock the Malossi pipe runs 500 rpms more and that Yasuni R runs 1000 rpms higher with power over stock
I have run all 3 pipes on stock bore and with Malossi MHR Replica
A kit adds alot of power but needs a carb upgrade and a temp gauge to protect the investment.
Stock Carb upjetted main and a bolt on 17.5 Dellorto carb
the stock throttle cable and autochoke can be used .
I have also swapped in malossi gears
I did have to lighten the weights so I could get the same shift points with the 11 to 1 gear ratio
From my experience over the last year tuning and my prior years experience tuning Yamaha Zumas and Vinos.