Has anyone had any issues with the metal cover that slides over to lock the ignition keyhole? In the past, I would sometimes have difficulty unlocking the cover when it was cold, so eventually I stopped using it. However, the other day someone stuck bits of wood in my keyhole (that sounds like a euphemism. ha) and after getting it out I decided to maybe start covering it again....that was a mistake, because now I can't get the cover open. I've pushed and pulled the little cover key in every direction, used force, pushed lightly, and it won't open. Any ideas?
Next, I'll try WD40 I suppose, but just wondering if anyone else has had issues with the keyhole cover getting stuck?
The ignition cover is stuck...help?
Moderator: Modern Buddy Staff
-
- Member
- Posts: 72
- Joined: Mon Sep 11, 2006 1:16 am
- Location: Chicago, IL
-
- Member
- Posts: 45
- Joined: Mon Dec 09, 2013 8:26 pm
- Location: Redding, CA
-
- Member
- Posts: 45
- Joined: Mon Dec 09, 2013 8:26 pm
- Location: Redding, CA
-
- Member
- Posts: 277
- Joined: Fri Jul 03, 2009 6:59 pm
- Location: Atlanta, GA
In case this issue recurs and your solution doesn't work next time. You can buy a set of keys and new security cover for $49 bucks at www.scooterloungeonline.com You could then swap the key blades from your working keys to the new key heads and install the new security cover.
The part number you need is - M25520300004
The part number you need is - M25520300004