Page 1 of 1

Stella Auto LED upgrade

Posted: Tue Dec 01, 2015 12:28 am
by Rune
Since the other thread was so old and there are better components available now, I'm making a new thread...

2x white bulbs for the tail / brake light:
OSRAM 5007 and 5008 compatible

4x amber lights for the signals:
OSRAM 7507 compatible

1x Relay box for LED and incandescent lights:
Orion LED Flasher Relay (Cross Reference: CF12ANL-01)

Posted: Tue Dec 01, 2015 12:55 am
by youkiddin
you should use red leds for the brake/tail.

Posted: Tue Dec 01, 2015 1:06 am
by Rune
youkiddin wrote:you should use red leds for the brake/tail.
What's your reasoning behind red bulbs? The lens is already red. I'm going for brighter - which the white LED bulbs are... Not to mention that some states require white bulbs.

Posted: Tue Dec 01, 2015 12:25 pm
by youkiddin

Posted: Tue Dec 01, 2015 2:01 pm
by Rune
From their real world testing, there's no reason for red on red.
Note that we have found that the white or "Super White" LED brake lights usually work best with the red tail light lens. There's no need for red LEDs and, in fact, they usually do not put out the same light levels as the white LEDs.
http://www.webbikeworld.com/lights/led- ... torcycles/

Re: Stella Auto LED upgrade

Posted: Tue Dec 01, 2015 4:27 pm
by jimmbomb
Rune wrote:Since the other thread was so old and there are better components available now, I'm making a new thread...

Thanks.. good info

Posted: Tue Dec 01, 2015 4:32 pm
by Rune
Thanks! I'll be posting pics in a few days =)

Posted: Wed Dec 02, 2015 7:27 pm
by az_slynch
Attached images, please log in.

Here are two pics of the taillamp on my 2013 Yager GT200i. Red Samsung LED tower topped with a RED Cree Q5 behind a projector lens. The taillamp lens itself is red. Yes, it is very bright and very noticeable, especially when the brake is applied. No fricken' laser beams; my phone camera added the ludicrous speed lines. It does throw some cool prismatic light whiskers onto nearby objects, though.

I had two bulbs, so I put the other on in the tractor taillight of my P200E. Taillight looks like an afterburner at night now. Didn't add any extra speed, though. :wink:

Posted: Fri Dec 04, 2015 2:28 pm
by jimmbomb
az_slynch wrote:Attached images, please log in.

Here are two pics of the taillamp on my 2013 Yager GT200i. Red Samsung LED tower topped with a RED Cree Q5 behind a projector lens. The taillamp lens itself is red. Yes, it is very bright and very noticeable, especially when the brake is applied. No fricken' laser beams; my phone camera added the ludicrous speed lines. It does throw some cool prismatic light whiskers onto nearby objects, though.

I had two bulbs, so I put the other on in the tractor taillight of my P200E. Taillight looks like an afterburner at night now. Didn't add any extra speed, though. :wink:
Where did you get the bulb that you put in the P200?

Posted: Fri Dec 04, 2015 10:50 pm
by az_slynch
jimmbomb wrote:Where did you get the bulb that you put in the P200?
Jim,

I picked it up from an e-bay seller named dt-autotech. Here's the current link to the auction:

http://www.ebay.com/itm/2X-1157-High-Po ... of&vxp=mtr


We know eBay to be a fickle thing, so aside from the sellers name, here are the keywords to help find the part should the link expire:

1157 High Power 5630 Chip+Cree LED Red

Posted: Tue Dec 08, 2015 1:35 pm
by jimmbomb
Thanks dude!