Hey,
Anybody find a rebuild kit for a Stella 2T Master Cylinder? I have looked at the major spots and did not see one. I really just need the rubber seal that the lever pushes in.
Thanks for any help/advice.
~climbamt
Stella Master Cylinder parts
Moderator: Modern Buddy Staff
-
- Member
- Posts: 32
- Joined: Sun Sep 16, 2012 2:47 am
- Location: Baltimore
Stella Master Cylinder parts
05 Vespa GT200
03 Genuine Stella 2T
05 Kymco People 150
03 Kymco People 50
03 Genuine Stella 2T
05 Kymco People 150
03 Kymco People 50
- az_slynch
- Member
- Posts: 1810
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
Cheapest option I could find for replacement:
Catalog:
http://www.sip-scootershop.com/files/ca ... .html#/527
Part:
http://www.sip-scootershop.com/main/bas ... r=56378800
Next time I get over to the garage, I'll take a look at one and see if any of the guts look familiar.
Catalog:
http://www.sip-scootershop.com/files/ca ... .html#/527
Part:
http://www.sip-scootershop.com/main/bas ... r=56378800
Next time I get over to the garage, I'll take a look at one and see if any of the guts look familiar.
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
-
- Member
- Posts: 32
- Joined: Sun Sep 16, 2012 2:47 am
- Location: Baltimore
Thanks,
I am hoping I don't have to replace the entire MC because of a $2.00 seal. After a couple of messages on Facebook, someone from Genuine is supposed to email me. I find it hard to believe they do not have a phone number or an email address on the website for help....
~climbamt
I am hoping I don't have to replace the entire MC because of a $2.00 seal. After a couple of messages on Facebook, someone from Genuine is supposed to email me. I find it hard to believe they do not have a phone number or an email address on the website for help....
~climbamt
05 Vespa GT200
03 Genuine Stella 2T
05 Kymco People 150
03 Kymco People 50
03 Genuine Stella 2T
05 Kymco People 150
03 Kymco People 50
-
- Member
- Posts: 34
- Joined: Thu Apr 19, 2018 6:55 pm
- Location: 70452
- az_slynch
- Member
- Posts: 1810
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
It is. The Stella is made by LML and is known as the Star or Belladonna to the rest of the world. The part will fit.chuckklr98 wrote:I cant find a rebuild kit either for an 08 stella 2t.
what the poster above sent was for an complete master cylinder, and it does not mention genuine stella at all. is it the right one ?????????
Here's the internals and a seal kit. The two kits are almost the cost on a new unit and the odds are that your fluid level sight glass is hazed and cracking anyway:
Inner Piston:
https://www.sip-scootershop.com/en/prod ... e_49837200
Seal Kit:
https://www.sip-scootershop.com/en/prod ... e_49474800
I'd dismantle and check the bore on your original part as well before springing for repair parts. If it's rusty, you might be able to have it honed, but it's a gamble. Brakes are not worth gambling on.
EDIT: Found this link, it's in Cali so the shipping may be cheaper than from Germany:
http://scooter-speed.com/vespa-brake-ma ... -49474800/
NOTE: It lists Grimeca, but it will fit. If you shop around, make sure you get a kit for the later, handlebar-mounted kit instead on the early semi-hydraulic kit that mounted on the fork.
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
-
- Member
- Posts: 34
- Joined: Thu Apr 19, 2018 6:55 pm
- Location: 70452
ended up just ordering a whole new master cylinder. sips wanted an 25 buck min, on a 20 buck part, than wanted 20 to ship an 1 oz part.
They way they presented it, the 20 buck seal kit, I had to buy the piston and spring too.....just to get over the 25 buck limit. $58 bucks total, and I;m not even sure it will work .
So I just ordered the whole damn thing from ScooterLounge for 173. At least I'll know that will work.
Already ordered a seal kit that somebody said would work......and it did not. 3 weeks and 20 bucks down the drain.
They way they presented it, the 20 buck seal kit, I had to buy the piston and spring too.....just to get over the 25 buck limit. $58 bucks total, and I;m not even sure it will work .
So I just ordered the whole damn thing from ScooterLounge for 173. At least I'll know that will work.
Already ordered a seal kit that somebody said would work......and it did not. 3 weeks and 20 bucks down the drain.
-
- Member
- Posts: 34
- Joined: Thu Apr 19, 2018 6:55 pm
- Location: 70452
on that site LML is not in the system. so what other model should I use? I need a throttle tube too.az_slynch wrote:It is. The Stella is made by LML and is known as the Star or Belladonna to the rest of the world. The part will fit.chuckklr98 wrote:I cant find a rebuild kit either for an 08 stella 2t.
what the poster above sent was for an complete master cylinder, and it does not mention genuine stella at all. is it the right one ?????????
Here's the internals and a seal kit. The two kits are almost the cost on a new unit and the odds are that your fluid level sight glass is hazed and cracking anyway:
Inner Piston:
https://www.sip-scootershop.com/en/prod ... e_49837200
Seal Kit:
https://www.sip-scootershop.com/en/prod ... e_49474800
I'd dismantle and check the bore on your original part as well before springing for repair parts. If it's rusty, you might be able to have it honed, but it's a gamble. Brakes are not worth gambling on.
EDIT: Found this link, it's in Cali so the shipping may be cheaper than from Germany:
http://scooter-speed.com/vespa-brake-ma ... -49474800/
NOTE: It lists Grimeca, but it will fit. If you shop around, make sure you get a kit for the later, handlebar-mounted kit instead on the early semi-hydraulic kit that mounted on the fork.