2006 Buddy 50 problem: One turn signal stays SOLID always

CountChocula · Post by **CountChocula** » Mon Aug 28, 2017 5:46 pm

Hi everyone.

Just noticed my right rear blinker is SOLID always when the bike is on.
Doesn't Flash when signal is on.

Other signals all flash but quicker than normal from what I remember.

Replaced the flasher with my Psycho flasher to test. No difference.

Checked bulb. Tight contact.

Checked fuse by battery. Fine.

Good battery.

Any guesses??!?!?!

Thanks
The Count

k1dude · Post by **k1dude** » Mon Aug 28, 2017 7:47 pm

Sounds like dirty or corroded contacts. Or perhaps a faulty relay.

CountChocula · Post by **CountChocula** » Mon Aug 28, 2017 10:25 pm

Sweet thanks.

I'll check the connections for corrsosion and the relay...I'll try to locate it.

CountChocula · Post by **CountChocula** » Tue Aug 29, 2017 6:47 am

Well I fixed it.

I just don't know how I fixed it.

I messed around with the connectors under seat, etc. and I didn't think anything was loose or corroded but....

it works!

Thanks