Page 1 of 1

Steibel horn keeps blowing fuse

Posted: Mon Mar 28, 2016 4:58 pm
by skully93
My awesome horn worked flawlessly for nearly 4 years. Now for some reason it keeps blowing fuses.

If I replace it, it works for a while, but pops again, so I don't want to melt anything.

I did purchase a new relay before I wised up and thought to check the fuse, which is only 7amps.

Has anyone had dealings with the upgraded horns on the Blackjack/Internationals?

Much appreciated!

Posted: Mon Mar 28, 2016 11:24 pm
by Syd
Does it blow fuses only when using the horn?

Posted: Tue Mar 29, 2016 12:06 am
by ni66er d1ck
Check the wiring for a short.

Posted: Tue Mar 29, 2016 5:55 am
by babblefish
I'm wondering whether or not the motor (for the compressor) in your horn is worn out. When a DC motor goes bad, it starts to draw more and more current. I don't know how much current a new horn draws, but if you can find that out and measure how much your horn is drawing, then you'll know for sure.

Posted: Tue Mar 29, 2016 1:18 pm
by DeeDee
I don't know how it has worked this long with a 7 amp circuit. They call for at least a 25 amp circuit wired into their relay and the stock switch of the Buddy:
http://www.valkmotive.com/installation- ... 18-404-415

Posted: Tue Mar 29, 2016 2:41 pm
by skully93
DeeDee wrote:I don't know how it has worked this long with a 7 amp circuit. They call for at least a 25 amp circuit wired into their relay and the stock switch of the Buddy:
http://www.valkmotive.com/installation- ... 18-404-415
Not sure either. That's just the horn in the battery compartment. It's tough to trace the bugger, but I'll see what I can do. Warmer weather incoming!